Test and analysis of reinforced concrete (RC) precast shear wall assembled using steel shear key (SSK)     

Shao-Dong Shen  Peng Pan  Qi-Song Miao  Wen-Feng Li  Run-Hua Gong 《地震工程与结构动力学》2019,48(14):1595-1612

Reinforced concrete (RC) precast shear walls are extensively applied in practical engineering, owing to their fast construction speed. However, because of the transport conditions, RC precast shear walls have to be separated into small wall segments during the factory prefabrication procedure before being assembled on site. Typically, wet-type jointing methods are adopted to link the segments, which is time-consuming and results in unreliable post-pouring area strength. To overcome this problem, the novel scheme of the steel shear key (SSK) featuring steel shear panels and combined fillet and plug welding is proposed. Three RC precast shear wall specimens with different linking strength, termed as weakened SSK wall, standard SSK wall, and strengthened SSK wall, respectively, and an integrated shear wall specimen were designed. Quasi-static cyclic loading was applied to investigate the specimens' dynamic properties. The test results suggest the prefabricated wall segments equipped with SSKs showed reliable stiffness and bearing capacity and were improved in energy dissipation ability, compared with conventional shear walls. As the shear stiffness and number of equipped SSKs increased, the specimens exhibited higher strength, but their ductility and energy dissipation were slightly decreased. Most importantly, the standard SSK wall specimen could achieve satisfactory bearing capacity and deformability and is thus recommended for precast building structures. Finite element method (FEM) models were established to validate the test results, and parametric study analysis was conducted based on the coupling ratio of the SSK walls. Finally, an appropriate coupling ratio range is recommended for practical engineering applications.  相似文献   

Variation in the vertical zonality of erodibility and critical shear stress of rill erosion in China's Hengduan Mountains     

Zhengan Su  Donghong Xiong  Jianhui Zhang  Tao Zhou  Hongkun Yang  Yifan Dong  Haidong Fang  Liangtao Shi 《地球表面变化过程与地形》2019,44(1):88-97

Soil erodibility is an essential parameter used in soil erosion prediction. This study selected the Liangshan town watershed to quantify variation in the vertical zonality of rill erodibility (k_r) in China's ecologically fragile Hengduan Mountains. Soil types comprised of yellow–brown (soil A), purple (soil B), and dry-red (soil C) in a descending order of occurrence from the summit to the valley, which roughly corresponds to the vertical climate zone (i.e. cool-high mountain, warm-low mountain, and dry-hot valley sections) of the study area. With elevation, vertical soil zonality varied in both soil organic matter (SOM) content and soil particle-size fractions. A series of rill erosion-based scour experiments were conducted, using water discharge rates of 100, 200, 300, 400, 500, and 600 mL min^-1. Additionally, detachment rates (Dr) were measured under three hydrological conditions (the drainage, saturation, and seepage treatments). Results show that both Dr and flow shear stress (Ʈ) values increased as discharge increased. As elevation increased, the k_r values decreased, while the vertical zonality of critical shear stress (Ʈ_c) values showed no obvious variation. The highest k_r values were observed during the seepage treatment, followed by the saturation treatment then drainage treatment, indicating that variation in vertical hydraulic gradients could significantly alter k_r values. This study also found that land-use types could also alter k_r and Ʈ_c values. Further research, however, is necessary to better quantify the effects of subsurface hydrological conditions and land-use types on k_r under different soil zonalities in China's Hengduan Mountains. © 2018 John Wiley & Sons, Ltd.  相似文献   

Flow resistance and hydraulic geometry in bedrock rivers with multiple roughness length scales     

Robert I. Ferguson  Richard J. Hardy  Rebecca A. Hodge 《地球表面变化过程与地形》2019,44(12):2437-2449

Many models of incision by bedrock rivers predict water depth and shear stress from discharge; conversely, palaeoflood discharge is sometimes reconstructed from flow depth markers in rock gorges. In both cases, assumptions are made about flow resistance. The depth–discharge relation in a bedrock river must depend on at least two roughness length scales (exposed rock and sediment cover) and possibly a third (sidewalls). A conceptually attractive way to model the depth–discharge relation in such situations is to partition the total shear stress and friction factor, but it is not obvious how to quantify the friction factor for rough walls in a way that can be used in incision process models. We show that a single flow resistance calculation using a spatially averaged roughness length scale closely approximates the partitioning of stress between sediment and rock, and between bed and walls, in idealized scenarios. Both approaches give closer fits to the measured depth–discharge relations in two small bedrock reaches than can be achieved using a fixed value of Manning's n or the Chézy friction factor. Sidewalls that are substantially rougher or smoother than the bed have a significant effect on the partitioning of shear stress between bed and sidewalls. More research is needed on how best to estimate roughness length scales from observable or measurable channel characteristics. © 2019 John Wiley & Sons, Ltd.  相似文献   

北京平原地区V_S30估算模型适用性研究   总被引：1，自引：1，他引：0  

江志杰  彭艳菊  方怡  吕悦军  修立伟  黄帅 《震灾防御技术》2018,13(1):75-86

本文使用基于钻孔测井数据的3类模型，即常速度外推模型、速度梯度模型、双深度参数外推模型，通过对北京地区460个深度超过30m的钻孔剪切波速资料进行分析，详细探究了V_S30估算模型在本研究区的适用性。研究结果表明双深度参数外推模型在估算V_S30上准确度很高，其不需要大量的数据进行回归分析，且不具有区域独立性，可以为全球包括北京地区场地类别划分提供依据，进而在震害快速评估中用于确定场地影响，是一种值得推广的估算模型。  相似文献   

Analytical and empirical models for predicting the drift capacity of modern unreinforced masonry walls     

Bastian Valentin Wilding  Katrin Beyer 《地震工程与结构动力学》2018,47(10):2012-2031

Displacement‐based seismic assessment of buildings containing unreinforced masonry (URM) walls requires as input, among others, estimates of the in‐plane drift capacity at the considered limit states. Current codes assess the drift capacity of URM walls by means of empirical models with most codes relating the drift capacity to the failure mode and wall slenderness. Comparisons with experimental results show that such relationships result in large scatter and usually do not provide satisfactory predictions. The objective of this paper is to determine trends in drift capacities of modern URM walls from 61 experimental tests and to investigate whether analytical models could lead to more reliable estimates of the displacement capacity than the currently used empirical models. A recently developed analytical model for the prediction of the ultimate drift capacity for both shear and flexure controlled URM walls is introduced and simplified into an equation that is suitable for code implementation. The approach follows the idea of plastic hinge models for reinforced concrete or steel structures. It explicitly considers the influence of crushing due to flexural or shear failure in URM walls and takes into account the effect of kinematic and static boundary conditions on the drift capacity. Finally, the performance of the analytical model is benchmarked against the test data and other empirical formulations. It shows that it yields significantly better estimates than empirical models in current codes. The paper concludes with an investigation of the sensitivity of the ultimate drift capacity to the wall geometry, static, and kinematic boundary conditions.  相似文献   

The recognition of former melt flux through high‐strain zones          下载免费PDF全文

Catherine A. Stuart  Sandra Piazolo  Nathan R. Daczko 《Journal of Metamorphic Geology》2018,36(8):1049-1069

High‐strain zones are potential pathways of melt migration through the crust. However, the identification of melt‐present high‐strain deformation is commonly limited to cases where the interpreted volume of melt “frozen” within the high‐strain zone is high (>10%). In this contribution, we examine high‐strain zones in the Pembroke Granulite, an otherwise low‐strain outcrop of volcanic arc lower crust exposed in Fiordland, New Zealand. These high‐strain zones display compositional layering, flaser‐shaped mineral grains, and closely spaced foliation planes indicative of high‐strain deformation. Asymmetric leucosome surrounding peritectic garnet grains suggest deformation was synchronous with minor amounts of in situ partial melting. High‐strain zones lack typical mylonite microstructures and instead display typical equilibrium microstructures, such as straight grain boundaries, 120° triple junctions, and subhedral grain shapes. We identify five key microstructures indicative of the former presence of melt within the high‐strain zones: (a) small dihedral angles of interstitial phases; (b) elongate interstitial grains; (c) small aggregates of quartz grains with xenomorphic plagioclase grains connected in three dimensions; (d) fine‐grained, K‐feldspar bearing, multiphase aggregates with or without augite rims; and (e) mm‐ to cm‐scale felsic dykelets. Preservation of key microstructures indicates that deformation ceased as conditions crossed the solidus, breaking the positive feedback loop between deformation and the presence of melt. We propose that microstructures indicative of the former presence of melt, such as the five identified above, may be used as a tool for recognising rocks formed during melt‐present high‐strain deformation where low (<5%) volumes of leucosome are “frozen” within the high‐strain zone.  相似文献   

2020年7月西北太平洋和南海“空台”环流特征分析          下载免费PDF全文

刘达  许映龙  向纯怡  陈博宇 《热带气象学报》2022,38(6):765-778

2020年7月西北太平洋和南海出现了史无前例的“空台”事件。利用NCEP再分析数据集、中国气象局(CMA)台风最佳路径等资料研究了此次“空台”现象的大尺度环流背景及动力和热力学特征。使用台风潜在生成指数(DGPI)分析发现2020年7月大尺度环流背景不利于台风生成,环流系统的异常通过影响对流层垂直风切变和垂直运动限制了台风的活动。2020年7月马斯克林高压较常年明显偏西偏弱,导致索马里急流强度减弱,越赤道气流不活跃,菲律宾以东洋面和南海海域盛行一致的偏东气流,历史同期活跃在该区域的季风槽无法建立,从而不利于热带扰动的生成。北半球极涡主体偏向西半球一侧,影响东半球冷空气势力较弱,副热带高压位置偏西;南亚高压较历史同期偏强且偏东,其东侧强盛的偏东气流将洋中槽截断,在西北太平洋区域出现反气旋性环流,该区域下沉气流增强,导致副热带高压强度增强,对流层中层强烈的下沉气流抑制了台风的生成和发展。此外,受中高层环流系统异常的影响,7月菲律宾吕宋岛以东洋面和南海地区环境垂直风切变较常年偏高2~4 m/s,南海部分海域偏高达4~8 m/s,同时该区域内异常偏强的下沉气流导致对流层低层相对湿度偏低,大气层结处于较为稳定的状态,动力和热力条件均不利于热带扰动的进一步发展。   相似文献   

淮河流域(河南段)连续性暴雨天气分型及环流背景          下载免费PDF全文

梁钰  王君  吴璐 《气象与环境科学》2019,42(2):48-54

利用19812016年68月河南省淮河流域64个国家自动观测站逐日2020时日降水量资料、常规高空探测和地面观测资料等对淮河流域连续性暴雨时间分布特征、影响系统等进行分析和天气分型,结果表明:1)36年淮河流域共发生45次连续性暴雨,2000年的最多,19982008年是高发期,近10年较少,年出现次数无明显减少趋势,存在2~4年和4~6年两个周期;7月连续性暴雨次数最多,6月的最少,旬分布呈正态分布;最长连续时间5天,连续2天的最多。2)影响系统主要有切变线和高低空急流,高空急流在方向转换的过程中,降水有24h左右的减弱期,低空急流有明显的日变化特征,夜间加强,白天减弱。3)连续性暴雨按照500hPa影响系统,分为低槽型、副高边缘型、西北低涡型三类。4)以不同类型的3次典型连续性暴雨为例,从大尺度环流背景、高度距平场、水汽输送、高低空急流等方面探讨了连续性暴雨的维持成因,3次连续性暴雨的发生与异常的500hPa大气环流、高低空急流、切变线和持续偏强的水汽输送等有关。  相似文献   

提高模式分辨率后热带气旋生成迟缓的原因分析          下载免费PDF全文

赵静娴  吴立广  段晶晶 《大气科学学报》2019,42(5):680-694

利用目前国际上最先进的中尺度WRF模式模拟热带气旋生成,网格分辨率从9 km增加到3 km,3 km网格中积云参数化方案不起作用,依靠微物理方案来模拟对流尺度系统特征,模式中热带气旋的生成过程变得迟缓。当低压扰动发展到一定程度后再加入3 km网格,生成过程有加快趋势。本研究针对该现象进行分析。结果表明:只用微物理方案使低层(950～700 hPa)风速的垂直切变减小,不利于对流发展;切变减小主要是由于动量垂直输送项的差异所致。在加入细网格的6 h内,低层对流尺度(减去区域平均)的动量垂直输送量平均增加了一倍,某些时刻达到了5倍以上;动量混合增加是由于微物理方案模拟的垂直速度增加所致。此外,只用微物理方案导致对流有效位能迅速被消耗。低层垂直切变和对流有效位能的减小都不利于对流发展,从而导致热带气旋生成发展过程迟缓。本研究表明,目前WRF中的微物理方案在模拟热带气旋生成过程中的对流发展时仍然存在问题。  相似文献   

桐柏杂岩南北边界剪切带的对比以及对桐柏造山带构造格局的制约     

李海龙  宋传中  韩建军  任升莲  李加好  张妍  王微  杨帆 《岩石学报》2018,34(3):813-836

桐柏杂岩的南北边界的剪切带分别是殷店-马垅韧性剪切带和晓天-磨子潭韧性剪切带,这两条韧性剪切带内都发育杆状构造,且杆状构造具有层状结构,层与层之间通过一种特殊的滑脱面结合。由于晓天-磨子潭韧性剪切带相对于殷店-马垅剪切带位置明显更靠近商丹断裂带,早期商丹断裂带的活动在岩石中留下的变形痕迹导致了后期晓天-磨子潭韧性剪切带的变形程度要略强于殷店-马垅剪切带。这两条剪切带都是以简单剪切为主的剪切带,变质条件也相似,都属于角闪岩相变质,处于中-下地壳流变层位置。U-Pb同位素测年结果显示,晓天-磨子潭韧性剪切带的活动年龄为171~142Ma,殷店-马垅韧性剪切带的活动年龄为164~137Ma,两条剪切带的主活动期都在中-晚侏罗世,在早白垩世随着岩浆活动的峰期到来慢慢减弱停止。桐柏造山带在印支晚期碰撞挤压背景下的向东挤出不是一个整体的挤出,而是有层次的差异挤出,挤出的同时层与层之间会发生滑动,滑脱面类似滑动的润滑剂,酷似"管状流动"的构造。在晓天-磨子潭韧性剪切带和殷店-马垅韧性剪切带的牵引作用下,整个桐柏造山带由西向东发生管状流动。  相似文献